VintageKustom.com: Repairing Kustom Amps » Krossroad 500 "pops" when powered off

Home » VintageKustom.com » Repairing Kustom Amps » Krossroad 500 "pops" when powered off

Show: Today's Messages :: Polls :: Message Navigator

Re: Krossroad 500 "pops" when powered off [message #28768 is a reply to message #28767]

Sun, 18 September 2022 08:12

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

You need to replace the two big power supply main rail filter cans and maybe any other electrolytic type caps in the amp.

After just even replacing those main rail filters you will find it makes a far better bass amp!

The worst thing in the world you can do to these filters is just have the amp sit around unused!

That safety start up circuit can not work once the power is turned off, if it could, then yes you would not hear that power down pop.

[Updated on: Sun, 18 September 2022 08:36]

Report message to a moderator

[Message index]

		Krossroad 500 "pops" when powered off By: rodak on Sat, 17 September 2022 13:22
		Re: Krossroad 500 "pops" when powered off By: stevem on Sun, 18 September 2022 08:12
		Re: Krossroad 500 "pops" when powered off By: rodak on Sun, 18 September 2022 20:31
		Re: Krossroad 500 "pops" when powered off By: rodak on Sun, 18 September 2022 20:36
		Re: Krossroad 500 "pops" when powered off By: stevem on Mon, 19 September 2022 05:40
		Re: Krossroad 500 "pops" when powered off By: rodak on Mon, 19 September 2022 10:03
		Re: Krossroad 500 "pops" when powered off By: stevem on Mon, 19 September 2022 18:34

Previous Topic:	250-4
Next Topic:	Frank schematic needed - PC101

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Nov 07 18:29:04 EST 2024