VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 1-L schematic (Kustom 1-L schematic)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom 1-L schematic [message #13424] Mon, 19 April 2010 10:55 Go to next message
mathes-amps is currently offline  mathes-amps
Messages: 7
Registered: October 2008
Junior Member
Looking for a schematic for kustom 1-L
thanks in advance for any replies
Re: Kustom 1-L schematic [message #13466 is a reply to message #13424] Mon, 26 April 2010 17:42 Go to previous messageGo to next message
mathes-amps is currently offline  mathes-amps
Messages: 7
Registered: October 2008
Junior Member
Got the amp working without the schematic, shorted 12 volt zener.
The lighted power / polarity switch is intermittent.
Anyone know of a replacement part for this?
Re: Kustom 1-L schematic [message #13470 is a reply to message #13424] Tue, 27 April 2010 05:44 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
What doesthe switch look like, is it like the square blue ones in the K150 and K250 models?
Re: Kustom 1-L schematic [message #13475 is a reply to message #13424] Tue, 27 April 2010 11:59 Go to previous messageGo to next message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
Isn't it a 3 position, center off, push-in, black rocker with a red neon pilot lamp? Maybe Mouser?

And mathes-amps, it would help if you include PC board numbers in your requests for schematics, as Kustom used the same boards in many of the amps of this era. Although the zeners are only shown on the main wiring layout of the power supply.
Re: Kustom 1-L schematic [message #13477 is a reply to message #13424] Tue, 27 April 2010 12:35 Go to previous message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
If its a snap in rocker type then finding a replacement should be easy.
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Wah pedal wiring
Next Topic: Need some info for a k 200 b5 head.
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Nov 01 03:09:17 EDT 2024