| Kasino Amp [message #27860] |
Sat, 12 September 2020 19:29  |
stroudsm
Messages: 6
Registered: April 2013
Location: United States
|
Junior Member |
|
|
|
I just bought a Kasino combo 4x10 200 watts. Looking at the literature here it looks like model 402. Does any one have specific literature, manual, schematics? It has no speakers but I think it came with 4 10" 16 ohms. First thing I did was replace the RCA jack speaker output with a 1/4 phone jack so I can hook up any external cabinet. Next will be to replace the two prong AC cord with a modern 3 prong grounded one. Any help or info appreciated.
|
|
|
|
| Re: Kasino Amp [message #27861 is a reply to message #27860] |
Mon, 14 September 2020 05:54  |
stevem
Messages: 4775
Registered: June 2004
Location: NY
|
Senior Member |
|
|
Hello and welcome.
I am not sure what you have there but Kustom would never use a rca type jack to feed speakers!
Number 1 a rca jack type connection can not handle the current it needs to pass even in a 100 watt amp, no less a 200 watt amp, and number 2 heavy enough two conductor non shielded rca type cables are not made by anyone, and 3 there is no definitive interlock when you plug it in!
A 200 watt Kustom / kasino wants a 4 ohm load to output its full amount of wattage.
I myself have never seen a 200 watt 4-10" Kasino model and I would think that it's more like a kustom k100 4-10" 100 watt combo, or a Kustom K150 4-10" model, both of which want a 8 ohm load to output there full wattage.
There's no majic to using this type of simple amp, so if you don't mind me saying I can't see why you would need a manual, you only need a foot switch to turn the effects off on the fly!
If you want you can remove the 4 screws from the bottom of the amp and take some photos to send me, I can then figure out what PC boards are in there and tell you what schematics we have on this site that would be the same .
Does the amp work now?
[Updated on: Mon, 14 September 2020 05:59] Report message to a moderator |
|
|
|
|
|
|
|
| Re: Kasino Amp [message #27864 is a reply to message #27860] |
Mon, 14 September 2020 11:45 |
chicagobill
Messages: 2006
Registered: April 2003
|
Senior Member |
|
|
Welcome.
With that pc board for the power amp, the RMS wattage is 100 watts. The peak music power rating is the 200 watts that you mentioned.
The word monitor is somewhat similar to what we think of as p.a. monitors nowadays. The monitor outputs could be sent to another powered speaker cabinet, or to a p.a. system or to a recording console.
|
|
|
|
|
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
]