VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » K150-5 Schematic

Show: Today's Messages :: Polls :: Message Navigator

K150-5 Schematic [message #9725]

Sat, 04 October 2008 18:07

jlwiley123
Messages: 4
Registered: October 2008

Junior Member

I need a schematic for a Kustom K150-5 PA Amp. This is a metal face amp.

Thanks

Report message to a moderator

Re: K150-5 Schematic [message #9743 is a reply to message #9725]

Sun, 12 October 2008 14:33

jlwiley123
Messages: 4
Registered: October 2008

Junior Member

I found information indicating the schematics are easier to locate if I supply the number on the boards - the one I need the schematic for most urgently is the board that connects to the output transistors - that one says "PC 5033 Rev 0" - does that help?

Thanks

James

Report message to a moderator

Re: K150-5 Schematic [message #9744 is a reply to message #9725]

Mon, 13 October 2008 07:25

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

That the driver board and is common to all the ono combo K150 models.
If you have a fax number I can fax you one today, it will be a k250 schematic but I will show you what componets are left off on the 5033 board.
Or on Tuesday I can fax or mail you a real schemaitc of a 5033 board.

Report message to a moderator

Re: K150-5 Schematic [message #9745 is a reply to message #9725]

Mon, 13 October 2008 07:26

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Sorry. that should have said non- combo.

Report message to a moderator

Previous Topic:	Hum, hum, hum
Next Topic:	Kustom 100 schematic

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Nov 10 03:31:26 EST 2024