VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » kustom bass amp specs

Show: Today's Messages :: Polls :: Message Navigator

kustom bass amp specs [message #15010]

Tue, 04 January 2011 18:51

rptrsn2
Messages: 28
Registered: September 2010
Location: canton mo

Junior Member

hey folks i got an old charger amp for free and am fixing it up. The speaker in it has been replaced. it is a kustom speaker with a big square magnet, 8ohm marked on it. my question is i know this amp is 200w but at 8 or 4 ohm. Is the 8 ohm speaker correct or do i need a 4ohm to get the full 200w.

Report message to a moderator

Re: kustom bass amp specs [message #15012 is a reply to message #15010]

Wed, 05 January 2011 09:58

LesS
Messages: 478
Registered: December 2002

Senior Member

Hi,
For the Charger you need an 8 ohm speaker.
Also, the output power for the Charger is 75 watts RMS.

Report message to a moderator

Re: kustom bass amp specs [message #15018 is a reply to message #15012]

Wed, 05 January 2011 14:52

rptrsn2
Messages: 28
Registered: September 2010
Location: canton mo

Junior Member

where did you get the 75w rating from? The back of the head unit on this amp says 200w, and the charger literature on this web site says 150w. I,m not saying your wrong cuz i have no idea other than what i,ve read and nowhere did i read 75w

Report message to a moderator

Re: kustom bass amp specs [message #15019 is a reply to message #15010]

Wed, 05 January 2011 16:04

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

The 200w marking is for the power consumed by the amp, not the power amp output.

150W is the peak power output which is twice the 75w r.m.s. rating.

Report message to a moderator

Previous Topic:	Argh! ANOTHER newbie needs advice
Next Topic:	2 x 15 speaker ID/suggestions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Nov 09 20:09:05 EST 2024