|
Re: Need some advice! [message #28823 is a reply to message #28822] |
Sun, 30 October 2022 17:05 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4768 Registered: June 2004 Location: NY
|
Senior Member |
|
|
Solid state amps that are not used for years or even 3 or 4 times a year for just a few minutes will need a cap/ filter job done to them way sooner then a amp that gets used a bit more often and for a longer amount of time.
Taking this into account I can not say what it might need.
With the 250 amps the Altec 421 bass drivers should have very big round magnets on them, you could reach the ports to feel that, and these Altec loaded bass cabs weigh a good bunch more then even the JBL bass loaded cabs do, so be ready.
400 is a hood price for a amp in a optional color.
I have no way of knowing what condition / how many hours of play time are on the speakers, but what a can tell you is that the amp does not have enough wattage to blow those 421 drivers.
When you test drive the amp you will the first to know!
Pictures can hosted by this site, so don't waste any more time on trying to do that.
[Updated on: Sun, 30 October 2022 17:11] Report message to a moderator
|
|
|
|
Re: Need some advice! [message #28828 is a reply to message #28824] |
Mon, 31 October 2022 11:35 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
stevem
Messages: 4768 Registered: June 2004 Location: NY
|
Senior Member |
|
|
I screwed up !
I thought you where looking at a K250 bass amp.
In the K150 line of amps the piggy back model ( non combo) bass amp would have only come with CTS 12"bass drivers with no Aluminum dome, and Altec never made a deadicated 12" bass drive so those in that cab must be for guitar.
|
|
|