VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Bias voltage

Show: Today's Messages :: Polls :: Message Navigator

Re: Bias voltage [message #28471 is a reply to message #28469]

Fri, 25 March 2022 16:30

DocWaxham
Messages: 46
Registered: October 2018

Member

What was the part numbers of the diodes did you use? I have 1n3754's, and some silicon diodes as well. My tech said my outputs were blown but i tested them and they checked fine. It didn't blow the fuse when it went down so I am stumped. I took out one of the drivers and it was ok. Really don't want to take them all out because my hunch is saying it is something else. Thanks

Report message to a moderator

[Message index]

		Bias voltage By: DocWaxham on Thu, 24 March 2022 15:20
		Re: Bias voltage By: stevem on Fri, 25 March 2022 06:12
		Re: Bias voltage By: DocWaxham on Fri, 25 March 2022 11:38
		Re: Bias voltage By: DocWaxham on Fri, 25 March 2022 16:30
		Re: Bias voltage By: chicagobill on Fri, 25 March 2022 14:34
		Re: Bias voltage By: stevem on Fri, 25 March 2022 18:40
		Re: Bias voltage By: chicagobill on Sat, 26 March 2022 12:55
		Re: Bias voltage By: DocWaxham on Sun, 27 March 2022 10:37
		Re: Bias voltage By: stevem on Sun, 27 March 2022 11:45
		Re: Bias voltage By: DocWaxham on Wed, 30 March 2022 14:25
		Re: Bias voltage By: stevem on Wed, 30 March 2022 17:42
		Re: Bias voltage By: DocWaxham on Thu, 31 March 2022 07:03

Previous Topic:	K150-1 Hum No Audio
Next Topic:	Rare m-350 B Head serial #2043

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Sep 10 06:18:35 EDT 2024