VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » K-250-4 Output
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K-250-4 Output [message #24693] Tue, 01 March 2016 18:31 Go to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
Ok guys I have a question about output. When I plug into channel 1 the volume knob is set on maybe #2 and it will deafen you. When I plug into channel 2 I have to turn the volume knob to 3 1/2 or 4 to get the same volume. Is this normal??? or should they both be close to the same. Now channel 1 has that select tone switch which channel 2 does not.

Steve

Report message to a moderator

Re: K-250-4 Output [message #24694 is a reply to message #24693] Wed, 02 March 2016 06:58 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
If you plug into the number two input on channel 2 is it then louder and more like channel one, or lower still?

If not then one of two possibility is that late in the 1971 production run of the K150s and 250s Kustom made a change to add more gain to the preamps and this in turn would make them louder for any givin volume knob setting, in short may be your amps channel two never got that late 71 mod, or that channel has a failing bypass cap in the circuit.

[Updated on: Wed, 02 March 2016 06:58]

Report message to a moderator

Re: K-250-4 Output [message #24695 is a reply to message #24694] Wed, 02 March 2016 11:14 Go to previous messageGo to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
If I plug into the lower input of channel 2 it does get louder. I enclosed a pic of what my settings on the volume dial are to be somewhat equal. The lower input of channel 2 is louder than the top one... What do you think???? Normal????

Steve

http://i1211.photobucket.com/albums/cc434/hunter12407/001_zpsjqudm9nk.jpg

Report message to a moderator

Re: K-250-4 Output [message #24696 is a reply to message #24693] Wed, 02 March 2016 11:22 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
If that's the case then the amp has been worked on and the jacks simply reinstalled in the wrong position.
The number 2 input on these metal face amps just like on Fender and many others is 1/2 the gain of the number one input of a given channel.

And by the way in seing the course tuck and roll on your amp in that picture means that your amp has the factory gain mod in place that I posted about before.

[Updated on: Wed, 02 March 2016 11:25]

Report message to a moderator

Re: K-250-4 Output [message #24697 is a reply to message #24696] Wed, 02 March 2016 11:36 Go to previous messageGo to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
One other note that I just tested. I have another K-250-4 same vintage as it has that xlr connection for the foot switch, if that is any indicator of age. I tested it just a few min ago and it does the exact same thing. The exact same settings on the volume and all. And the bottom input of channel 2 is louder than the top. Could 2 amps be backwards???I know anything is possible when you don't know what has been done to it.

Steve

Report message to a moderator

Re: K-250-4 Output [message #24698 is a reply to message #24697] Wed, 02 March 2016 13:22 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
The lower input jack on the slant metal face amps should be louder than the upper input jack.

Kustom described the input differences as to an instrument using single coils could use the lower input jack for a gain closer to a instrument using humbucking pickups in the upper jack.
With your amps having the XLR jack for the lighted footswitches, the amps may have been produced prior to 11-1-71 when the dealer mod was issued to change the gain of the PC5066.
pleat

Report message to a moderator

Re: K-250-4 Output [message #24699 is a reply to message #24698] Wed, 02 March 2016 14:56 Go to previous messageGo to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
Thank You Steve and Pleat for the info. I can rest at ease.

Ya know I would have thought that Channel 2 would have been the one with the most output because it is the channel that has ALL of the effects. But then again I am no amp engineer.

BTW serial numbers for my 2 K-250-4 are 82610 and 90346. If that helps

Thanks guys

Steve

[Updated on: Wed, 02 March 2016 15:48]

Report message to a moderator

Re: K-250-4 Output [message #27455 is a reply to message #24699] Mon, 22 July 2019 08:08 Go to previous message
johnnysynth is currently offline  johnnysynth
Messages: 46
Registered: June 2018
Member
you have two (2) Kustom 250-4's ? Wow! I'm having trouble just finding ONE. Any of your rigs for sale? johnnysynth@yahoo.com

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K 250-4 amp
Next Topic: Melody Matinee Kickstarter?
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 13:35:31 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software