VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » 3 loose wires (what did these go to?)

Show: Today's Messages :: Polls :: Message Navigator

3 loose wires [message #20553]

Sun, 04 May 2014 08:07

vintagefan
Messages: 166
Registered: March 2014
Location: Dallas

Senior Member

Hi all,

When I opened up my K100C-8 4-10, there are 3 loose wires..... Here's a picture. Any ideas what these 3 wires were for? The amp works and sounds great.

http://s1299.photobucket.com/user/stevethedjthedj/media/Mobi le%20Uploads/image_zps06aa0dae.jpg.html

Report message to a moderator

Re: 3 loose wires [message #20556 is a reply to message #20553]

Mon, 05 May 2014 06:21

stevem
Messages: 4773
Registered: June 2004
Location: NY

Senior Member

That is replacement power transformer in the amp and I see that whoever did the repair work also installed a front load type separate fuse holder.
For those three wires I would get 3 more of those little blue wire nuts, remove the tape. Add the wire nuts and then tape the 3 of them back up and tuck them into the area between that transformer and the rear wall of the amp and you done.

Report message to a moderator

Previous Topic:	need help with static problem
Next Topic:	loud pop early K200A-1

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Fri Nov 01 04:50:13 EDT 2024