VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Cracked A-4 Plexi (Pulled a John Fogerty!)

Show: Today's Messages :: Polls :: Message Navigator

Cracked A-4 Plexi [message #26493]

Wed, 24 January 2018 18:32

Shaun_Musings
Messages: 323
Registered: April 2009
Location: Reading, MA

Senior Member

Hey, everyone, I have three Kustom A-4 heads (1967 with two circuit breakers SN #16767, 1968 #20084, 1968 #21242). I somehow managed to crack the face plate on the left (Trem/Vib side) on the #20084 A-4. Some of the underside paint appears to have come off, as well. Any suggestions on what I can do? I have an A-5 donor head that was sold to me by a friend on here; would the holes match up?

SDC

Born on the Baaaaayou (Ok, in Massachusetts)

Report message to a moderator

Re: Cracked A-4 Plexi [message #26494 is a reply to message #26493]

Thu, 25 January 2018 05:59

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

I don't know what your thinking here as the face plates between the A4 and A5 heads from 1968 and up even though they will exchange fit wise are labeled different so I can't see how you would make use of the swap?!

Whenever you remove a face plate some of the gloss black paint on its rear will come off, what I do is just touch it up with gloss black enamel from a bottle or enamel spray from a can.
Do not use a lacquer base paint!

Report message to a moderator

Re: Cracked A-4 Plexi [message #26504 is a reply to message #26494]

Sat, 27 January 2018 17:56

Shaun_Musings
Messages: 323
Registered: April 2009
Location: Reading, MA

Senior Member

No Message Body

Born on the Baaaaayou (Ok, in Massachusetts)

[Updated on: Wed, 03 March 2021 20:19]

Report message to a moderator

Previous Topic:	K150 Wattage-Volts
Next Topic:	Reverb issue with 250 guitar head

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Nov 19 08:48:33 EST 2024