VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » Kustom PA horn cabinet info
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom PA horn cabinet info [message #27297 is a reply to message #27296] Thu, 02 May 2019 12:38 Go to previous message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
The Kustom Altec horn box is 14" tall, 24" wide and I'm not sure of the depth. The PA cabs from the 300/600 series cab are 54" tall x 24" wide. The guitar cabs of the 250/500 series are 46" tall x 24" wide. The single 15 + altec horn cab used the same horn as the guitar and PA cabs. Both height dimensions are without casters. You can go to the literature section and count the T&R which are 2" pleats.

pleat

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Question on cabinet for 150 head
Next Topic: K100 has no low end sound
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Aug 08 12:13:54 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software