VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Suggestion for replacement filter caps on K200A-2?
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Suggestion for replacement filter caps on K200A-2? [message #28895 is a reply to message #28889] Fri, 13 January 2023 03:16 Go to previous messageGo to previous message
claussoegaard is currently offline  claussoegaard
Messages: 27
Registered: July 2022
Junior Member
Perfect! Those should work just fine. If I do end up replacing them, do you have any tips for how to mount them? The existing caps are 2.5" diameter, and the replacements are 2". Ideally I'd prefer to not drill any new holes, so I'm thinking maybe some padding of some sort around the new caps so I can use the existing 2.5" bracket? Otherwise I guess I'd need new 2" brackets, but I have no idea where to source something like that.

Any advice or guidance would be greatly appreciated!

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Screws for back of Kustom Cabs
Next Topic: Replacement fuse in K200A-2 after 110 -> 230V conversion
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jun 20 19:28:21 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software