VintageKustom.com: Comment Board » low handles on a cab

Home » VintageKustom.com » Comment Board » low handles on a cab

Show: Today's Messages :: Polls :: Message Navigator

low handles on a cab [message #24673]

Wed, 24 February 2016 00:23

Snodgrass
Messages: 139
Registered: January 2008
Location: Bartlesville, OK

Senior Member

http://img.photobucket.com/albums/v133/fnbandits/DSCN3957.jpg

no holes anywhere else anybody know anything?

[Updated on: Wed, 24 February 2016 00:26]

Report message to a moderator

Re: low handles on a cab [message #24674 is a reply to message #24673]

Wed, 24 February 2016 00:33

Snodgrass
Messages: 139
Registered: January 2008
Location: Bartlesville, OK

Senior Member

http://img.photobucket.com/albums/v133/fnbandits/DSCN3958.jpg

Report message to a moderator

Re: low handles on a cab [message #24675 is a reply to message #24673]

Wed, 24 February 2016 06:22

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Looks like it's been recovered and the baffle board was put back in upside down.

Report message to a moderator

Re: low handles on a cab [message #24676 is a reply to message #24675]

Wed, 24 February 2016 07:49

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

The cabinet started out in life as a 3x15 cab and someone cut id down to a 2x15.
pleat

Report message to a moderator

Re: low handles on a cab [message #24678 is a reply to message #24673]

Wed, 24 February 2016 13:34

Iowa Boy
Messages: 767
Registered: June 2014

Senior Member

Actually I counted the pleats and it appears to be 2 15's with horn cabinet and the horn removed and the baffle cut and flipped and bottom of the cabinet shortened.

Report message to a moderator

Re: low handles on a cab [message #24679 is a reply to message #24678]

Wed, 24 February 2016 22:25

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

Count down the T&R on a 3x15 cab and the handle is at 15. It appear the handle on the cabinet shown in the photo, the handle also at 15.

There the only other reason the handle would that low is, if they had really short people as roadies.

pleat

Report message to a moderator

Re: low handles on a cab [message #24682 is a reply to message #24673]

Thu, 25 February 2016 10:56

Iowa Boy
Messages: 767
Registered: June 2014

Senior Member

Your right Pleat....I miss counted. Thought it was 10 not 15. No wonder I have to redo my W-4 again. Too many late nights working on my taxes. Smile

Seems to me since I don't see any wheels on the cabinet, that it would make more sense to flip the baffle board and turn the cabinet upside down......I'm assuming the T&R is also rippled on the bottom as well. At least then the handles would be at a practical height. With an amp sitting on top, you'd not see the seam.

[Updated on: Thu, 25 February 2016 11:02]

Report message to a moderator

Previous Topic:	Any owners of the L 1 1x12?
Next Topic:	I am in possession of a rare Kustom 10x10 cab

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Nov 11 11:04:39 EST 2024