| K200B 5 PA head inquiry [message #16015] |
Tue, 16 August 2011 23:09  |
devereauxiv
Messages: 5
Registered: August 2011
Location: Long Island
|
Junior Member |
|
|
Hello all:
i am new to this site and I had a question or two about a Kustom stack that my father in law has in his basement. He has a 4 channel Tuck n Roll head, each channel has Volume, treble, bass and reverb knobs, the single cabinet has 2x 15" speakers and 1 X 15" aluminum cone horn/driver. He said at one time he had two matching cabinets but now only has the one. I have been trying to find info on when it was made and possibly its value. It is n very good condition with a little tearing on the rear panel of the cabinet due to road wear.
James D. Jones IV
|
|
|
|
| Re: K200B 5 PA head inquiry [message #16016 is a reply to message #16015] |
Wed, 17 August 2011 11:15  |
chicagobill
Messages: 2006
Registered: April 2003
|
Senior Member |
|
|
Welcome to the place!
If you look at the back panel of the amp there is a serial number plate. Write down the serial number and then search the board here for the serial number list that Les Strickland has posted. It will give you a fairly accurate year of construction.
As for value, color, condition, model and location will all factor in the value. PA heads tend to be less valuable as most buyers tend to look for instrument heads.
|
|
|
|
|
|
| Re: K200B 5 PA head inquiry [message #16019 is a reply to message #16016] |
Wed, 17 August 2011 11:59 |
devereauxiv
Messages: 5
Registered: August 2011
Location: Long Island
|
Junior Member |
|
|
I looked for the serial number info on this forum with no luck. The serial number is 40415. Any ideas as to its year of production?
James D. Jones IV
|
|
|
|
| Re: K200B 5 PA head inquiry [message #16022 is a reply to message #16015] |
Wed, 17 August 2011 17:28 |
chicagobill
Messages: 2006
Registered: April 2003
|
Senior Member |
|
|
Sorry, I just searched and I guess that Les has removed the list from his posting. He or one of the other guys may stop by here and see your post and they may be able to give you a date.
If you pull the amp chassis out of the case, you can read the date code on the parts, which will give you an approximate build time.
|
|
|
|
|
|
|
|
|
|
|
|
| Re: K200B 5 PA head inquiry [message #16029 is a reply to message #16027] |
Thu, 18 August 2011 12:51 |
Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
|
Senior Member |
|
|
It is worth whatever you can get out of it. Seriously! If it all works 100.00- 150.00 The PA stuff just isn't as desirable as the instrument stuff. At least to me anyway for the head alone and the Tuck and roll has to be very nice too. It is all about color and condition.
[Updated on: Thu, 18 August 2011 13:01] Report message to a moderator |
|
|
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
]