VintageKustom.com: Comment Board

Home » VintageKustom.com » Comment Board » Knobs..

Show: Today's Messages :: Polls :: Message Navigator

Knobs.. [message #4152]

Sun, 02 May 2004 19:56

VinceG2
Messages: 26
Registered: April 2004

Junior Member

Hi, can anyone tell me if these are the same knobs used on the Kustom amps? http://www.cosmocorp.com/kp-handler.cfm?CAT=R&SUBCAT=1&KN=3&src=17 I think 7602 because of the 1 inch size? Has anyone done detailed measurements?

Report message to a moderator

Re: Knobs.. [message #4153 is a reply to message #4152]

Sun, 02 May 2004 23:24

LesS
Messages: 478
Registered: December 2002

Senior Member

Hey VinceG2, The 7602 knob looks very close. Here�s what I got: A(skirt diameter) 7602 1.000 Kustom 1 B(height) 7602 .594 Kustom .56 D(diameter) 7602 .812 Kustom .78 -Les S.

Report message to a moderator

Re: Knobs.. [message #4358 is a reply to message #4152]

Mon, 14 June 2004 22:39

KustomBlues
Messages: 494
Registered: June 2001
Location: Michigan

Senior Member

Yes, that is the company that originally made the knobs and made the ones some of people from the group went in and ordered some reproduction knobs from. It was an ordeal.... I still have some of those knobs left. They had to do mold repair and we had to have a miniumum order before they'd even do it. Maybe you guys can take over that knob reorder project and handle it this time. Look into it and let me know.

Report message to a moderator

Previous Topic:	K-25/K-50 amp impedance
Next Topic:	Frankin cascade

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Oct 31 21:25:22 EDT 2024