Kustom Lead Head [message #7084] |
Fri, 30 June 2006 13:03 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
ZiggyDude
Messages: 24 Registered: May 2006 Location: Harrisburg PA
|
Junior Member |
|
|
I was at a shop in Lemoyne PA. They have a red T&R lead head. Tubes, says 50 watts on the front I think - looks like 2 inputs. It is on consignment and they are asking way too much for it - $329 I think. Looks pretty clean - but that is all I know. Just in case anyone is after one of them.
|
|
|
Re: Kustom Lead Head [message #7106 is a reply to message #7084] |
Mon, 03 July 2006 11:02 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
That is the Chinese TRT50 head. Not too bad and can get nice lead sounds. the channel switching is quite good. I have a TRT100 head. A little too strong for most gigs though. 325 is not a bad price for the head if you want it. Still aint Kustom though.
Conrad
|
|
|
|
Re: Kustom Lead Head [message #7113 is a reply to message #7110] |
Tue, 04 July 2006 02:25 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
To my knowledge, the original Kustom T&R was made from approximately 1966 to 1972, starting with the Frankenstein models, to the A series and then the B series Plexiglass faced amps. Then the slant faced 150, 250 series in about 1972 until they stopped production of the T&R styles. There was never a tube model in those years even though Ebay sellers sometimes mistakenly call the K200's tube models. I am not the historian of dates. The new Kustom company, the actual company and location I think was Cincinatti started importing fully tube models the TRT50 and TRT100 in about 1998. These were made in China to reduce the costs of production but it did not reduce the price very much. The amps were solid in their design and construction but the cabinets left a lot to be desired. The cabinets were constructed from 1/2" particle board and the T&R was crooked and not even. It took my son 3 attempts to get a 2x15 cabinet that looked decent. That cabinet is now a PA rack and the speakers are in monitors. He still has the head but we don't use it very often. It is very deep as the tubes are horizontal and sticking out the back with a perforated cover over the tubes for protection. It has a good sound but I have read other posts that dispute this. I suppose different heads had different sonic qualities.
Conrad
|
|
|
Re: Kustom Lead Head [message #7116 is a reply to message #7084] |
Wed, 05 July 2006 07:21 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
stevem
Messages: 4758 Registered: June 2004 Location: NY
|
Senior Member |
|
|
I have the red 100 watt head that I got in 2001 on closeout from musciains friend for 400 bucks, some 300 bucks less than normal. Changing out the china made tubes for good old american made NOS tubes makes a world of difference.
|
|
|