VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » K200B2 static (Sporatic static with all controls off or on!)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K200B2 static [message #12682] Tue, 19 January 2010 02:41 Go to next message
jimi
Messages: 46
Registered: February 2003
Location: Redding Ca
Member
All effects work on my K200B2. It will sound good until it warms up. Then it will start making this static, rumbling sound. It's not external radio interference but something internal. It will come and go or it could go on for minutes at a time. It will do this with reverb and tremelo controls off and everything turned down with no guitar plugged in or with guitar plugged in and everything on and volume up, it doesn't seem to make any difference. Also it's common for the volume to drop after playing for a while, still there but quite a bit lower than the starting point. It will do the volume trick with or without the static going on. I've got a feeling these to phenoms could be related but have no tech experience to diagnose it. Does this sound familiar to anyone?
Re: K200B2 static [message #12684 is a reply to message #12682] Tue, 19 January 2010 06:21 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4755
Registered: June 2004
Location: NY
Senior Member
It sounds like the problem is not related to either channel which means it it being produced in the Driver/Output stage, or the Power Supply.
It could be just something as simple as a bad solder joint, or a semiconductor/Transistor breaking down.
Looks like either way you are going to need the talent of a repair tech
Re: K200B2 static [message #12693 is a reply to message #12684] Tue, 19 January 2010 14:47 Go to previous message
jimi
Messages: 46
Registered: February 2003
Location: Redding Ca
Member
Thanks for the quick reply Steven! I'll Take it in-Jim
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: III Lead age?
Next Topic: What year is my K150-8?
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jul 24 16:57:31 EDT 2024