Screws for back of Kustom Cabs [message #28867] |
Thu, 15 December 2022 23:15 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
SouthernVersion
Messages: 23 Registered: January 2021 Location: New York
|
Junior Member |
|
|
Accidentally posted this on the "Comment board" so I'm reposting it in the correct place!
I have an old Kustom 3x15 cab that I bought a few years ago. Sadly, someone lost all but 4 of the screws. The thing rattles like hell, which I assume is because there are only 4 screws holding in the back. Whoever had the cab before me put black sticky shit all on the inside to keep the back closed, I removed as much of it as I could when I got it, cause when I opened it up I got the black crap all over me.
Anyways, if anyone knows where to get more of those screws let me know.
And let me know if getting those screws would even help with the rattling.
Thanks!
-Matthew
Vintage Kustom K100-2 w/ Matching 2x12 Cab
Vintage Kustom 3x15 Bass Cab
|
|
|
|
Re: Screws for back of Kustom Cabs [message #28877 is a reply to message #28867] |
Wed, 21 December 2022 16:11 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
rodak
Messages: 515 Registered: October 2001 Location: Georgia
|
Senior Member |
|
|
What you're looking for is stainless-steel oval-head wood screws, with the matching shoulder washers. You should be able to get these at Home Depot, Lowes or Ace Hardware. I think it's #10 size that you want. They'll look exactly like the originals, in my experience.
www.combo-organ.com
|
|
|
|