VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Wiring Diagram for PA columns with 6 16 ohms Kustom Speakers (How do I wire the PA columns for the correct load?)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Wiring Diagram for PA columns with 6 16 ohms Kustom Speakers [message #26159] Mon, 22 May 2017 16:00 Go to previous message
MRBASSMANTROUT is currently offline  MRBASSMANTROUT
Messages: 2
Registered: May 2017
Location: KCK
Junior Member
I recently purchase two Cascade covered PA columns. When I opened the columns I found each have 6, 8 inch, 16 ohm speakers. I have to rewire them because part of the wiring is missing. My question is how to I wire the columns up to get the correct factory load? And is there a wiring diagram for me to follow? Thanks in advance for any input you might have.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kasino U100-P - Reverb
Next Topic: Frankenstein Head replace electrolytic captor on reverb board
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Tue Jul 16 20:40:59 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software