VintageKustom.com: Repairing Kustom Amps » K100c-7 intermittent signal

Home » VintageKustom.com » Repairing Kustom Amps » K100c-7 intermittent signal

Show: Today's Messages :: Polls :: Message Navigator

K100c-7 intermittent signal [message #26341]

Sat, 30 September 2017 16:41

natedriver
Messages: 35
Registered: March 2009

Member

Hi I have a k100c-7 slant face amp and it randomly stops outputing signal. almost everytime this has occured the amp is on and resting an it hen just stops hissing. indicator light is on i turn off then on and no thump. wait a while and then it pops back on.

i do slam some pedals into it but it usaully cuts out when nothing is being played. it has a pretty big thump. FIlter caps gone bad?

Thanks Nate

Report message to a moderator

Re: K100c-7 intermittent signal [message #26342 is a reply to message #26341]

Sat, 30 September 2017 20:17

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

I had the same amp and issue. I found that the CR902 diode on the power amp board had slipped out of it's clip. the diode snaps into a retaining clip on the frame that the power transistors are mounted on. Once the amp cooled down a bit, the amp would work, then fade out. Clipped the diode into it's mounting clip and has ran ever since without fail.

Just a thought.
pleat

Report message to a moderator

Re: K100c-7 intermittent signal [message #26344 is a reply to message #26341]

Sun, 01 October 2017 00:52

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

If the amp pilot lamps stay lit and it's just the sound that dies out, then I'd check the speaker and the wiring for loose connections or broken solder joints.

Report message to a moderator

Re: K100c-7 intermittent signal [message #26345 is a reply to message #26341]

Sun, 01 October 2017 06:13

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

If both channels are cutting out and you have another amp around take the signal out of the amps monitor jack, if that signal cuts out too when the Kustom craps out then you have a issue on the PC 900 driver/ power amp board.

My first guess on this issue would be a bad solder connection, or that first input Transistor ( Q900) is going intermittent.

Also make sure the Blue wire that feeds the speaker output jack has good connections ar both ends.

Hopefully it will be a easy fix like what Bill told you to check, let us know what you find.

[Updated on: Sun, 01 October 2017 06:17]

Report message to a moderator

Re: K100c-7 intermittent signal [message #26346 is a reply to message #26345]

Sun, 01 October 2017 13:27

natedriver
Messages: 35
Registered: March 2009

Member

im wondering if im overloading the amp with signal and overheating something. last time it happened it took it out of the case plugged it in and touched the chassis signal came on. weird

Nate

Report message to a moderator

Re: K100c-7 intermittent signal [message #26349 is a reply to message #26341]

Mon, 02 October 2017 05:53

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Once again a question, are both channels cutting out?

Report message to a moderator

Previous Topic:	Speaker Repair
Next Topic:	K200-B5 reverb questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Nov 19 11:13:16 EST 2024