VintageKustom.com: Repairing Kustom Amps » Clean grill cloth and speaker impedance for K200 x3

Home » VintageKustom.com » Repairing Kustom Amps » Clean grill cloth and speaker impedance for K200 x3 (Advice needed for cleaning grille cloth and speaker impedance on vintage Kustom)

Show: Today's Messages :: Polls :: Message Navigator

Re: Clean grill cloth and speaker impedance for K200 x3 [message #24159 is a reply to message #24157]

Mon, 16 November 2015 06:22

stevem
Messages: 4772
Registered: June 2004
Location: NY

Senior Member

Large ciramic magnet drivers like Pleat posted would add a good amount of weight to the cab, but Alinco magnet types like JBL D120s or Altec 417 will not kick the weight up too much, of course finding them in the needed 16 ohm versions will be a search for sure!
If you might look in to the Jensen drivers with the neomag set up as they do sound great, but if you do pull those speakers out and they still are the original C12N models do not toss them as they are worth a lot even in there 16 ohm form!

Report message to a moderator

[Message index]

		Clean grill cloth and speaker impedance for K200 x3 By: shonodel on Sun, 15 November 2015 16:36
		Re: Clean grill cloth and speaker impedance for K200 x3 By: pleat on Sun, 15 November 2015 21:59
		Re: Clean grill cloth and speaker impedance for K200 x3 By: shonodel on Mon, 16 November 2015 12:12
		Re: Clean grill cloth and speaker impedance for K200 x3 By: stevem on Mon, 16 November 2015 06:22
		Re: Clean grill cloth and speaker impedance for K200 x3 By: shonodel on Tue, 17 November 2015 12:59

Previous Topic:	Weak signal (one side)
Next Topic:	Kustom V Lead

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Oct 02 16:44:42 EDT 2024