VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » Licon switch replacement
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Licon switch replacement [message #23713 is a reply to message #13322] Wed, 26 August 2015 19:20 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
I have replacements that are new, but of different manuftacture and look 95% the same when mouted in the front panel .they are not cheap unfortunally at 60 bucks before shipping.
The only other thing you can do is to mount a regular size DPDT switch on the original mounting bracket and have its bat handle poke thru the face.
If only your switches threaded shank is cracked ckean and not missing peices you can use nylon cable ties to pull it back together around the mounting bracket.
I do this to all my metal face amps just to reinforce the switch and take the push load off of the shank!
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom K200D Bass Guitar tuners?
Next Topic: Sidewinder Diode CR1 & CR2 replacement (part no: 007-6011-00)
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 17 22:03:01 EST 2024