Speaker impedance [message #3323] |
Mon, 15 December 2003 11:53 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
rodak
Messages: 515 Registered: October 2001 Location: Georgia
|
Senior Member |
|
|
I just became the proud owner of a Kustom Kombo organ (Thanks, Dan!). It has the JBL's and horns - the JBL's are blown, and I don't have any interest in getting them reconed or replacing them with JBL's. They're 16ohm speakers, so my question is - The Kombo supposedly has a K200A power amp, so what's the lowest impedance it can safely handle? I would think it's 4ohms, and I assume they put 16ohm speakers in the Kombo with the idea that most people would be using an extension speaker, which goes in parallel and does not disable the internal speakers. I may re-wire the external speaker jack to disable the internals, in which case, I assume I'd be ok with putting 8ohm speakers in it.
www.combo-organ.com
|
|
|
|
Re: Speaker impedance [message #3331 is a reply to message #3327] |
Mon, 15 December 2003 16:55 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
Hey, are those the D130F's?? If you throw them out, throw them in my direction. I will even pay the shipping.
Conrad
|
|
|
Re: Speaker impedance [message #3335 is a reply to message #3331] |
Tue, 16 December 2003 12:39 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
rodak
Messages: 515 Registered: October 2001 Location: Georgia
|
Senior Member |
|
|
Sorry to get everyone's hopes up, but I don't plan on pitching the JBL's. I've seen blown ones on eBay go for anywhere from $30 to $80, so I plan on listing them there. Should nearly pay for a couple of Eminence's (I have a friend who's a dealer, and can get them cheap).
www.combo-organ.com
|
|
|
Re: Speaker impedance [message #3392 is a reply to message #3323] |
Tue, 30 December 2003 12:11 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
bigben
Messages: 5 Registered: November 2003
|
Junior Member |
|
|
I ALSO HAVE A KUSTOM 200B WITH A 2-15 BOTTOM CAN I PUT 2 4 OHM SPEAKERS IN THIS CAB TO MAKE IT 2 OHM. OR WILL IT BURN OUT THE HEAD? OR JUST MAKE IT LOUDER? WOULD YOU LET ME KNOW. THANKS BASSMAN..ALSO WHAT IS THE WATTAGE OF THE 200B I THINK ONE SIDES FOR BASS AND THE OTHER IS FOR GUITAR,
|
|
|
Re: Speaker impedance [message #3441 is a reply to message #3392] |
Fri, 02 January 2004 10:58 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
Not a good idea. The Kustom 200/400 series amps had a large value resistor in the emitter of the output transistors. This causes a large feedback voltage at 2 ohms and that causes the amp to become unstable and sounds pretty funky. I don't know if the amp will be damaged, but you won't like the sound. If you have 2 4 ohm speakers, hook them in series for 8 ohms and your power will be about 65 watts. Thats not a lot, I know, but your amp will love you for it. They do have souls you know.
Conrad
|
|
|