Kustom Studio 4-valve rebuild [message #12335] |
Tue, 10 November 2009 11:28 |
JBranch
Messages: 9 Registered: November 2009 Location: Central GA
|
Junior Member |
|
|
Hi all, I'm gathering info on materials to rebuild my Kustom Studio 4-valve cabinet. I have some duplicate threads around on this, but thanks to the help of lots of kind folks on the internet, I've gathered together some info on it.
I have the power amp, the tubes, and the control section, so I'll be rebuilding the cabinet. I have the dimensions of the cabinet and know that it is oak. I have to replace the speakers, I have a picture showing them as Celestion G12-80s. The closest thing I can find now is the Celestion G-12 Classic Lead. I'm ASSUMING that this is the same speaker?
Casters are no big deal.
I've found a Fender handle that looks pretty close, but it has silver fasteners instead of gold.
I also need some tweed material for the cover. The original was a rectangular tweed weave.
And I need a speaker baffle. I've used the search function here, and was recommended to use fiberglass speaker enclosure from Radio Shack. I haven't checked on this yet.
I have the original "K Studio 4-Valve" badge, but am missing the smaller "Celestion" badge.
Amy I missing anything? Ideas for sources on the things I don't have?
Note: I'm not trying to hoodwink anyone by rebuilding this and selling it as "vintage" I just want to build it back as close as possible to original condition.
Thanks,
John
|
|
|