VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » need part transformer
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
need part transformer [message #8437] Fri, 16 March 2007 11:19 Go to next message
serabul is currently offline  serabul
Messages: 10
Registered: March 2007
Location: home
Junior Member
Can anyone tell me if the old transformers from the early k 200b-1 be rebuilt if not I NEED ONE can enyone help send me in write direction Evil or Very Mad thanks serabul

Report message to a moderator

Re: need part transformer [message #8441 is a reply to message #8437] Mon, 19 March 2007 07:02 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4746
Registered: June 2004
Location: NY
Senior Member
It cost more to rebuild one than to get a new one,Avel transformers in CT has great toroidal tramsformers, and I think the one you need is part number Y236603, but I would check with them on how many voltamps the new transformer needs to be, the old transformer put out 40 volts to a bridge type rectifier.
This will not mount like the original kustom part, you will have to get 2 steel L BRACKETS to bolt to each side to stand it up where the old one was mounted as I do not think there will be room to mount it flat where the old one was.
I your original transformer is bad, make sure the diodes or not shorted also!

Report message to a moderator

Re: need part transformer [message #8442 is a reply to message #8437] Mon, 19 March 2007 07:43 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4746
Registered: June 2004
Location: NY
Senior Member
I also think a hammond manufacturing part number 167L44 will work, but it has a center tap lead that you would not use.
This is a standartd X type mounting transformer like the original, but I would still call them to check if my choise was correct.

Report message to a moderator

Re: need part transformer [message #8474 is a reply to message #8442] Thu, 29 March 2007 20:53 Go to previous message
Haltone
Messages: 16
Registered: March 2000
Location: Syracuse NY
Junior Member
I have several parts amps. Post the part number on the transformer or email to me. Hal

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Would appreciate any info on my Kustom Amp
Next Topic: Hi folks, newbie here seeking a little info about a used Kustom combo
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jun 22 14:27:46 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software