Kustom Super 100 [message #15632] |
Sun, 15 May 2011 15:09 |
cassent5150
Messages: 341 Registered: August 2009
|
Senior Member |
|
|
I'm back at it again with a new project. I'm building a cloned K100-1 head chassis and cabinet. So far the cabinet is somewhat completed by my friend Don Diaz. He also did the metal chassis and I'm doing the stuffing. Using the parts laying around its going to be a full blown K250 with the K-III preamps. I gotta shrink down a copy of the K200A-1 face plate to fit the front yet.
Looks like just enough room for everything. I posted some pic's of the project so far at the link below
http://www.flickr.com/photos/57807996@N04/sets/7215762672753 5574/
Steve C
|
|
|
|
|
|
Re: Kustom Super 100 [message #15658 is a reply to message #15657] |
Tue, 17 May 2011 18:29 |
cassent5150
Messages: 341 Registered: August 2009
|
Senior Member |
|
|
Yes your right!!! I just made another template with a better fit. I removed the photo in the link and replaced it with 2 more of the new template. I did a little stretching and think I might have the room for all on front now. If your at all like me I never liked the switch in the back, it just didn't seem very handy back there. That was a K200B-1 Face plate I was imaging from because I needed the 2 channels with four controls on each channel to accomidate the pre-amps.
Steve C
|
|
|
|