Kustom 3x12" cabonet... Any infos? [message #13551] |
Tue, 04 May 2010 16:59  |
Vintage
Messages: 23 Registered: March 2006 Location: Montréal
|
Junior Member |
|
|
Hi everyone!
I have a 3x12" cabinet, and cannot find any information in the Literature section.
Anyone knows anything about them?
Like... the era they were produced, were they in the Kustom bass or guitar configurations, etc...
Thanks!
[Updated on: Tue, 04 May 2010 17:00] Report message to a moderator
|
|
|
|
Re: Kustom 3x12" cabonet... Any infos? [message #13561 is a reply to message #13557] |
Wed, 05 May 2010 06:56  |
pleat
Messages: 1459 Registered: June 2004 Location: Belding, Mi
|
Senior Member |
|
|
If you go to the literature tab, click on 100/200/400 tab and at the bottom of the catalogs click on the Kolor Katalog Supplements and you will find the 3x12 cabs. The cab was offered in CTS for bass, Jensen and Altec for guitars. The price lists show them. JBL were not offered according to the price lists. The cabinet is 22 T&R or 44" tall and that box also housed the 2x10 over 2x12 speaker combination.
To determine if your cabinet is for bass or guitar, removing the back and identify what speakers are in the cabinet will tell the real story. The speaker jack plate should be labeled as to the speakers inside, but after 40 years, a lot of speaker changes could have been made.
pleat
|
|
|