Kustom Kombo Rebuild [message #25954] |
Wed, 22 February 2017 23:48 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
nobake
Messages: 4 Registered: February 2017
|
Junior Member |
|
|
Hello! I recently recieved a Kombo off the side of the road and someone ripped out all of the electronics under the organ, wondering if anyone on here owns one and would be willing to take pictures of it in detail to help me piece together at least enough to get it back and running with an external amp for now.
|
|
|
Re: Kustom Kombo Rebuild [message #25957 is a reply to message #25954] |
Thu, 23 February 2017 09:16 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
rodak
Messages: 515 Registered: October 2001 Location: Georgia
|
Senior Member |
|
|
Wow, that's so sad!
I have Kombo organ. I'll help you out as much as I can.
You wouldn't happen to be in Iowa, would you? I heard recently of a Kombo there that was in sad shape and the owner was looking for someone to just take it off his hands. I wonder if he gave up and dumped it.
www.combo-organ.com
|
|
|
|
Re: Kustom Kombo Rebuild [message #25961 is a reply to message #25958] |
Thu, 23 February 2017 13:56 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
rodak
Messages: 515 Registered: October 2001 Location: Georgia
|
Senior Member |
|
|
No. I was contacted off-list. But it wasn't by the owner, just by someone he had contacted trying to get it to a good home. Too far for him (or me) to drive, and no one on my Combo Organ discussion group was interested either.
My understanding was that the internal power amp (and possibly speakers) had been removed, but all the organ guts were intact. Lift the top lid by prying it up just behind the drawbar panel, and you'll see all the organ electronics. If it all looks intact, all you should need is a power supply, which shouldn't be too hard to rig up, and a 1/4" jack connected to the organ output, and you can plug it into a separate amp.
I'm glad someone who cares found it!
www.combo-organ.com
[Updated on: Thu, 23 February 2017 13:56] Report message to a moderator
|
|
|
|
|
Re: Kustom Kombo Rebuild [message #25973 is a reply to message #25954] |
Wed, 01 March 2017 21:30 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
rodak
Messages: 515 Registered: October 2001 Location: Georgia
|
Senior Member |
|
|
I'm not sure what you mean - farthest forward on right of what - one of the circuit boards?
Do you have schematics, and are you able to follow a schematic? (You can download the schematics free from my website) I'm really not intimately familiar with the wiring, but I have a schematic and can trace the wires. There would be power wires coming from the power supply. It looks like there are 27V regulated and -37V unregulated lines, and of course a ground wire. You'd need to build a supply to produce these voltages. It wouldn't have to be beefy, as the organ circuitry doesn't draw much current. Then there'd be an output wire, probably shielded, coming from the top section to the bottom section. And of course the wires for the power switch and pilot light. You MUST have a pilot light. I think there are government regulations stating that all pre-1970 Kustom plexi amps and organs must be fitted with a jewel pilot light, preferably purple. (Of course, I'm just kidding, but I consider the purple jewel pilot light one of Kustom's many charms - I even installed green jewel pilot on my Krossroad 500 head, to match it's green Naugahyde!)
www.combo-organ.com
|
|
|