VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 200 fuse

Show: Today's Messages :: Polls :: Message Navigator

Kustom 200 fuse [message #2641]

Sat, 05 April 2003 15:06

bw45
Messages: 1
Registered: April 2003

Junior Member

Please help....I just obtained a late 60's Kustom 200 amp...sounded great. I tried to replace the small light bulb and tried one from my Fender amp which worked. I must have blown a fuse because the amp won't come on at all now. I cannot locate where the fuse is. Any clues?

Report message to a moderator

Re: Kustom 200 fuse [message #2642 is a reply to message #2641]

Sat, 05 April 2003 15:57

Bill
Messages: 64
Registered: March 2002
Location: Kansas

Member

You will find the fuse(s) in two places. First, right behind the power switch area on the back of the face plate. On some amps, there is also a fuse at the inside back near the speaker output jack. I only have this on my "A" models and is only for the speaker output. My "B" models only have the power fuse on the front inside. To get access to them, turn the power head upside down and remove the four screws, then slide the amp out of the case. If it is an "A" model, there are five screws. There may be other variations, but this is what I have found on my three K200's. Good Luck, Thrill Bill

Report message to a moderator

Re: Kustom 200 fuse [message #2645 is a reply to message #2642]

Sat, 05 April 2003 18:04

Anonymous

thrill Bill....bingo! fixed the problem. I really appreciate your help.

Report message to a moderator

Re: Kustom 200 fuse [message #2648 is a reply to message #2645]

Mon, 07 April 2003 07:40

stevem
Messages: 4754
Registered: June 2004
Location: NY

Senior Member

The polit light from a fender amp is 6.3 volt bulb, the Kustom is a higher voltage bulb.They will not sub for each other.

Report message to a moderator

Re: Kustom 200 fuse - where do you get them? [message #2667 is a reply to message #2641]

Mon, 14 April 2003 17:52

Anonymous

I am having trouble finding these fuses.....AGX3 125 VOLT 1 inch long. Any suggestions? For my Kustom 200B-4 amp.

Report message to a moderator

Re: Kustom 200 fuse - where do you get them? [message #2669 is a reply to message #2667]

Mon, 14 April 2003 21:01

KustomBlues
Messages: 490
Registered: June 2001
Location: Michigan

Senior Member

try www.mouser.com, they usually have everything.

Report message to a moderator

Re: Kustom 200 fuse - where do you get them? [message #2671 is a reply to message #2669]

Tue, 15 April 2003 07:51

stevem
Messages: 4754
Registered: June 2004
Location: NY

Senior Member

Hi, If you are able to solder, get a fuse holder with leads on it and a AGC style fuse for the amperage you need. Put it in and cable tie it down to filter cap wires. The AGC type fuses are far more common to locate.

Report message to a moderator

Previous Topic:	KUSTOM 300 P/A 1970
Next Topic:	KUSTOM 11-B GUIRAR HEAD

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 20 08:37:38 EDT 2024