VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Help (Blowing 100 ohm resistor)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Help [message #25772 is a reply to message #25748] Sat, 14 January 2017 21:36 Go to previous messageGo to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
I'm confused here, but that's easy for me. Which model amp are you fixing here?

How many driver transistors are there on the board? There are two different driver transistor types, one NPN and one PNP. You must replace the NPN with another NPN and the PNP with another PNP. When you test them they will test differently the NPN will read low when the red lead is on the base and the PNP will read low with the black lead on the base.

Please tell us which anp and how you are testing the transistors, so we can help you fix it correctly.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom cab
Next Topic: Kustom 100 C-6
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Aug 09 14:03:59 EDT 2024