VintageKustom.com: Replacement Part Suggestions » Recovering with used Tuck n' Roll

Home » VintageKustom.com » Replacement Part Suggestions » Recovering with used Tuck n' Roll (Possible?)

Show: Today's Messages :: Polls :: Message Navigator

Re: Recovering with used Tuck n' Roll [message #20641 is a reply to message #20639]

Tue, 20 May 2014 09:07

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

You'll want to measure the depth of the bottom part of the 250 head. The 3x12 cabinet may be too narrow in depth to use once removed from the 3x12 to cover the depth of the wider depth of the slant head cabinet. Handle location on the T&R that you are removing from the 3x12 cab may place the screw holes in the material may be in a funky place if you use the material from the wider bottom part of the material.

A lot of work and you end up with a stripped 3x12 cabinet. I'd wait and look for a charcoal K250 head. Maybe use the 3x12 as part of a swap deal to get what you need.
pleat

Report message to a moderator

[Message index]

		Recovering with used Tuck n' Roll By: oren hudson on Mon, 19 May 2014 22:57
		Re: Recovering with used Tuck n' Roll By: stevem on Tue, 20 May 2014 06:21
		Re: Recovering with used Tuck n' Roll By: pleat on Tue, 20 May 2014 09:07

Previous Topic:	kustom 250 main filters
Next Topic:	Sidewinder

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Aug 15 12:57:54 EDT 2024