| 1969 Altec 2x15 revisited [message #19652] |
Fri, 22 November 2013 17:27  |
oren hudson
Messages: 274
Registered: March 2008
Location: Gastonia, NC
|
Senior Member |
|
|
Well, I'm back at it on this rig. Thanks to the advice and guidance of you guys, I was able to get the cab apart. After trying a number of ways to remove the "buggered" speaker mounting bolt, I was finally able to do so. Problem is, none of the nut and bolt folks around here have anything near it. So, in my effort to keep everything as original as possible, I'm asking if any of you guys might have an extra one of these odd mounting bolts around and would be willing to sell it to me. It would be the stock one from the 1969 era. It's black with a flat head. The threaded side of the head has extended blades protruding that anchor into the wood as the nut is tightened. So, anybody got one stuck back somewhere? As always, your help is greatly appreciated. Thanks. 
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
- but anyway, I've found that timber bolts have a very similar head and "wing" design. Just haven't found any that are 1 1/2 inches long. Most are way longer or shorter. 
]