VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » where can i find a whatchamahoozit for a k150-2? (broken diody thing blues)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
where can i find a whatchamahoozit for a k150-2? [message #28959] Tue, 28 February 2023 21:02 Go to previous message
pinkjimiphoton is currently offline  pinkjimiphoton
Messages: 45
Registered: May 2015
Location: the dark side of the moon
Member
hi fam
working on a kustom k150-2, had a super weak output.... someone had replaced the heat sinked germanium driver transistors with a mismatched set of si npn/pnp and one of the power transistors had base disconnected.
i found the "nte equivalents" and got the proper heat sinks off a donor carcass i have. of course replacing these resulted in the fuse instantly blowing quite spectacularly. Wink

when i had it apart, i disconnected that diode looking thing that sits between the power transistor from its clip/heat sink and one of the dang legs broke off right at the case.
i'm a fair solderhand, but no way to tag this puppy.

does anyone have a spare they wanna part with, or a substitute part? i believe this is being used as a thermostat?

any advice gratefully accepted with thanks
peace
PjP
[Message index]
 
Read Message
Read Message
Read Message
Previous Topic: .5 watt or 1watt resistors
Next Topic: K100-1 power indicator light bulb and assembly
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 17 23:48:12 EST 2024