| casters for tuck and roll cabs [message #9585] |
Mon, 18 August 2008 14:23  |
raw-dogg
Messages: 13
Registered: January 2008
Location: nyc
|
Junior Member |
|
|
don't know if this is already common knowledge or not but I just found a great replacement caster for my vintage tuck and roll 2x15 cab. I'm guessing they all used the same ones with the 2" ball. I needed to replace 2 of mine (ha-ha-ha- I get it!!!). I was looking all over the net and on ebay and everywhere. Then I decided to check out for the hell of it HOME DEPOT.They had a similar one but then I checked Lowes.com. Low and behold they have an EXACT replacement. They go for $2.97 for 2. The only difference is that they're brass instead of chrome. At that price and convenience WHO CARES??? The screw holes line up too. Anyone interested go to lowes.com. The model # is 4307299 and the item# is 67040. AWESOME!!!
[Updated on: Mon, 18 August 2008 14:24] Report message to a moderator |
|
|
|
| Re: casters for tuck and roll cabs [message #9586 is a reply to message #9585] |
Mon, 18 August 2008 15:10  |
rodak
Messages: 516
Registered: October 2001
Location: Georgia
|
Senior Member |
|
|
Yep, they are a nearly exact match. I used them on my Kombo organ - had to re-do the way they attached underneath, so the screw heads went in the opposite way. With the nuts coming out the bottom, the thinner plate of the Lowes casters caused the ball to scrape on the bottom of the screws.
If your Kustom is Gold in color, the Lowes casters actually enhance the appearance,I think.
www.combo-organ.com
[Updated on: Mon, 18 August 2008 15:11] Report message to a moderator |
|
|
|
|
|
| Re: casters for tuck and roll cabs [message #9588 is a reply to message #9587] |
Tue, 19 August 2008 09:39 |
rodak
Messages: 516
Registered: October 2001
Location: Georgia
|
Senior Member |
|
|
Do you have a link to those? The only ones I found there were these:
http://www.tubesandmore.com/scripts/foxweb.dll/moreinfo@d:/dfs/elevclients/cemirror/ELEVATOR.FXP?item=P-HW10
www.combo-organ.com
|
|
|
|
| Re: casters for tuck and roll cabs [message #9589 is a reply to message #9588] |
Tue, 19 August 2008 09:40 |
rodak
Messages: 516
Registered: October 2001
Location: Georgia
|
Senior Member |
|
|
Never mind I found them. Searching for the words "caster" or "casters" did not turn these up:
http://www.tubesandmore.com/scripts/foxweb.dll/moreinfo@d:/dfs/elevclients/cemirror/ELEVATOR.FXP?item=P-HW07
www.combo-organ.com
|
|
|
|
|
|
|
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
]