VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » repairing k150-8 plexi (troubleshooting blowing fuses)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
repairing k150-8 plexi [message #24179] Sat, 28 November 2015 10:13 Go to previous message
natedriver is currently offline  natedriver
Messages: 35
Registered: March 2009
Member
I have a k150-8 plexi head that is blowing fuses. I built a bulb limiter. I am getting 55v and -55v off the filter caps. the schematic for board 5032 shows 39.5v and -39.5v.
Am I missing something here? Any help would be appreciated before I move foward with trouble shooting the power amp board thanks. Nate

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Frankenstein Head: replacement cap values
Next Topic: Kustom 200 A-4 (Earlier)
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jun 19 16:17:22 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software