VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Kustom part

Show: Today's Messages :: Polls :: Message Navigator

Kustom part [message #1049]

Mon, 26 November 2001 18:59

GDubb
Messages: 1
Registered: November 2001
Location: Kansas City

Junior Member

I need an IC (prefer 2) that is Kustom Part # 007-7015-00. I have a Kustom 300 and this IC is blown, which kills the reverb circuit. The IC is an SL14228, 14 pin dual op-amp. Anyone know a source for this part? Thanks in advance! GDubb

Report message to a moderator

Re: Kustom part [message #1050 is a reply to message #1049]

Mon, 26 November 2001 23:48

KustomBlues
Messages: 490
Registered: June 2001
Location: Michigan

Senior Member

Try www.mouser.com and good luck! Deb

Report message to a moderator

Re: Kustom part [message #1051 is a reply to message #1049]

Tue, 27 November 2001 00:34

KustomBlues
Messages: 490
Registered: June 2001
Location: Michigan

Senior Member

Crap, Mouser doesn't have them. Try this address: http://www.summitelectronics.com/search.html or http://www.findchips.com/cgi-bin/nph-findchips.cgi or http://www.brookdale.com/

Report message to a moderator

Re: Kustom part [message #11048 is a reply to message #1049]

Fri, 15 May 2009 17:44

gdtaylor
Messages: 3
Registered: May 2009
Location: Fayetteville, NC

Junior Member

Use an NTE725 Dual Op Amp IC. Same pin outs with lags.

Report message to a moderator

Previous Topic:	K250 hiss on selectone channel
Next Topic:	K150 blows fuses

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jun 30 17:52:48 EDT 2024