VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » Reverb/Tremelo Preamp
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Reverb/Tremelo Preamp [message #18693] Sat, 27 April 2013 20:34 Go to next message
stroudsm is currently offline  stroudsm
Messages: 6
Registered: April 2013
Location: United States
Junior Member
I need a Reverb/Tremelo Preamp board (Think its PC303). It's the one with Rev/Trem and Preamp all on one board with jack for a foot switch. Contact me via email if you know where I can get a working one. scotty.stroud@gmail.com

thanks
Scotty

Report message to a moderator

Re: Reverb/Tremelo Preamp [message #18744 is a reply to message #18693] Sat, 18 May 2013 02:14 Go to previous messageGo to next message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
Take it to a tech and get it repaired. That is going to be easier than finding a board. The only way to find a board is buying a doaner amp and scavenging parts from it to make yours work. However for a little bit of money you could get both to work. They are pretty easy to repair.

Report message to a moderator

Re: Reverb/Tremelo Preamp [message #18747 is a reply to message #18744] Sat, 18 May 2013 10:59 Go to previous messageGo to next message
stroudsm is currently offline  stroudsm
Messages: 6
Registered: April 2013
Location: United States
Junior Member
I was able to find the problem. In the past someone repaired the amp by replacing some transistors in the front end of the pre-amp. Instead of removing and replacing them they just cut the legs and soldered a new one on. One of the legs of Q302 had come unsoldered. Soldering it back fixed the problem Thanks for your advice and to Conductor Tom for encouraging me to troubleshoot it.

Report message to a moderator

Re: Reverb/Tremelo Preamp [message #18751 is a reply to message #18747] Sat, 18 May 2013 18:19 Go to previous messageGo to next message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
great to hear, congrats! Very Happy

Report message to a moderator

Re: Reverb/Tremelo Preamp [message #18755 is a reply to message #18751] Sun, 19 May 2013 14:40 Go to previous message
conductortom
Messages: 96
Registered: July 2010
Location: Okla
Member
Glad it was an easy fix, Scotty. Keep in touch. Great group of folks here. Any questions you got someone here will more then likely will know the answer, or make up a good one! Welcome to our Kustom world!

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: wanted info on Kustom Guitars
Next Topic: Need a power module for bass cab(Got one! Please close)
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 03 01:32:18 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software