| Re: Fired up my Kustom Amp For First time in 20+ Years [message #26693 is a reply to message #26692] |
Tue, 08 May 2018 22:22   |
B-Dubs
Messages: 15
Registered: April 2018
Location: Boston, Ma
|
Junior Member |
|
|
Hi Gang,
I opened up the amp head tonight just to have a look. I put my father-in-laws old Simpson 260 multi-meter on the output cable and I think I am getting 3 volts. I set the meter on DC+, 10v, and it is giving me 3 if I'm reading the correct scale I took a look inside, didn't see any thing obvious, like swelled popped caps, looks like a large cap has been replaced on the effects board, and it looks like there are 2 legs sticking out of same board that aren't attached to anything, but seems they should be (one has a blob of solder on end), maybe why the vibrato never worked. I took some photos, but I can't post them yet. I don't think that I am going to able to do much with it myself, but have someone that I can take to, and will pass on tips from you guys to him, and the schematics.
Thanks,
Bob W
|
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
