VintageKustom.com: Repairing Kustom Amps » Modifying K150-6 to put out 300 watts

Home » VintageKustom.com » Repairing Kustom Amps » Modifying K150-6 to put out 300 watts

Show: Today's Messages :: Polls :: Message Navigator

Modifying K150-6 to put out 300 watts [message #6367]

Mon, 05 December 2005 08:53

FunkMasta
Messages: 2
Registered: December 2005
Location: Ohio

Junior Member

My dad has a K150-6 from the early 70's. It has high/low input, volume, bright, treble, bass, controls on both the left and right side. Correct me if my thoery is wrong. I believe each side is getting 150 watts. Is it possible to take 150 watts from one side and modify so that the other side has 300 watts? If this is possible please give ideas on how to go about doing this. thanx.

keep that funk alive

Report message to a moderator

Re: Modifying K150-6 to put out 300 watts [message #6369 is a reply to message #6367]

Mon, 05 December 2005 08:59

stevem
Messages: 4774
Registered: June 2004
Location: NY

Senior Member

In a k150 both channels feed into the 75 watt RMS poweramp(150 watts peak)If you want 300 watts the best way to do it would be to get a seperate poweramp and more speakers.

Report message to a moderator

Re: Modifying K150-6 to put out 300 watts [message #6370 is a reply to message #6369]

Mon, 05 December 2005 09:02

FunkMasta
Messages: 2
Registered: December 2005
Location: Ohio

Junior Member

alright. Thanks a bunch. I just wanted to find out before i ordered a new speaker. And that would have been fun too lol. Thanx again

keep that funk alive

Report message to a moderator

Previous Topic:	K200 hiss
Next Topic:	Commander Hiss

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Nov 06 14:58:07 EST 2024