VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Input probs

Show: Today's Messages :: Polls :: Message Navigator

Input probs [message #22265]

Wed, 28 January 2015 22:47

twault
Messages: 13
Registered: January 2015
Location: belmont, oh

Junior Member

Ok. So, I bought 2 Kustom 300 heads for $125. One works. One assumed not. The power cord was cut on the non-working one. I planned on rewiring it and expecting a fuse to blow or an explosion to occur. As it turns out, I rewired a cord, and it works...sort of. Input 1 and 2 work. 3-6 do not. Where do I start? Also, is the polarity switch a big deal? There is a white connecter that doesn't seem to want to fit down in the switch, but I can't get my fat fingers in there without unplugging the board. I can't tell if it is broken or just apart. I didn't have much time to test after the rewire tonight, I was just happy it was somewhat working.

I'm here to kick ass and chew bubblegum, and I'm all out of bubblegum.

Report message to a moderator

[Message index]

		Input probs By: twault on Wed, 28 January 2015 22:47
		Re: Input probs By: chicagobill on Thu, 29 January 2015 00:57
		Re: Input probs By: twault on Thu, 29 January 2015 01:09
		Re: Input probs By: chicagobill on Thu, 29 January 2015 01:45
		Re: Input probs By: twault on Thu, 29 January 2015 09:14
		Re: Input probs By: stevem on Thu, 29 January 2015 06:25

Previous Topic:	treating naugahyde to shine ?
Next Topic:	K150-8 smoking...help please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jun 26 15:40:52 EDT 2024