VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » Classified Ads » Wanted » Need 1 metal foot for 300 PA amp
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Need 1 metal foot for 300 PA amp [message #21792] Sun, 02 November 2014 06:25 Go to next message
fieldflower is currently offline  fieldflower
Messages: 71
Registered: July 2004
Location: Sweden
Member
Hi,

Missing one of the metal feet on my "new" 300 PA.
If anyone has one of those to sell I'd be a happy camper.

(Leg stand would be even cooler, but guess the shipping to Sweden would be no fun.)
Re: Need 1 metal foot for 300 PA amp [message #21795 is a reply to message #21792] Sun, 02 November 2014 11:54 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
Is the leg screwed in or is it nailed in........I have both and take them off my amps since they tend to put indentations on the tuck & roll?
Re: Need 1 metal foot for 300 PA amp [message #21796 is a reply to message #21795] Sun, 02 November 2014 13:02 Go to previous messageGo to next message
fieldflower is currently offline  fieldflower
Messages: 71
Registered: July 2004
Location: Sweden
Member
Iowa Boy wrote on Sun, 02 November 2014 17:54
Is the leg screwed in or is it nailed in........I have both and take them off my amps since they tend to put indentations on the tuck & roll?


The amp end of it is screwed in. See picture.
Haven't even considered taking them off, but I guess that would be an option when not having any legs to put on.
But I actually like the look of the mount itself...

http://s21.postimg.org/78043f95f/DSC_0041.jpg

Re: Need 1 metal foot for 300 PA amp [message #21797 is a reply to message #21792] Sun, 02 November 2014 14:45 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
Sorry, thought you were talking about the legs on the bottom of the cabinet. I do have one of those as well but am looking at a couple more amp heads so can't part with it just yet.......but its next to impossible to find a stand for those amps. If you haven't found one by the first of the year, let me know....by then I can let you know if I still need it or not.
Re: Need 1 metal foot for 300 PA amp [message #21798 is a reply to message #21797] Sun, 02 November 2014 15:07 Go to previous messageGo to next message
fieldflower is currently offline  fieldflower
Messages: 71
Registered: July 2004
Location: Sweden
Member
Iowa Boy wrote on Sun, 02 November 2014 20:45
Sorry, thought you were talking about the legs on the bottom of the cabinet. I do have one of those as well but am looking at a couple more amp heads so can't part with it just yet.......but its next to impossible to find a stand for those amps. If you haven't found one by the first of the year, let me know....by then I can let you know if I still need it or not.


I will definitely take You up on that.
Getting a stand for it would be super cool (although a little afraid of what freight to Sweden would cost.)

What I'm mostly missing though is one of the little metal cup feet just on the bottom of the amp.
I have 3, which is just one to few... A little rattly (which makes for interesting sound effects with the reverb.) Wink
If anyone have one of these I'm very interested.
Re: Need 1 metal foot for 300 PA amp [message #21799 is a reply to message #21792] Sun, 02 November 2014 19:37 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
If your not concerned about keeping it absolutely original, you can go to any online cabinet hardware catalog and purchase 4 new metal caps. I do have these as well and I take them off of my amps since they will leave rust stains on the tuck and roll. Thought about cleaning them up and shooting them with silver paint but I don't like the indentations they leave in the speaker cabinet. Guess they could also be re-chromed if someone wanted to keep it original

I actually am building a wire/conduit mobile unit to put my PA amps on. I am using the wire shelving that go into closets and then reinforcing the bottom of the shelves with 1/2 conduit that has a threaded rod going all the way thru it to mount on 3/4 inch conduit that make up the sides. The shelves are set at an angle so the amps won't fall out. Then I will attach casters on the ends of the side poles to make it mobile. Could also be built with wood, but steel conduit will be lighter and since the wire shelves are already white, will shoot all the conduit in white as well. My PA system will contain 3 amp heads. K400 with a K300 to drive the (4) 3-15 cabinets and the 2 individual Altec horns, and then a k200 that will run my 595 monitor speakers.
Re: Need 1 metal foot for 300 PA amp [message #21801 is a reply to message #21798] Mon, 03 November 2014 07:10 Go to previous messageGo to next message
carlc is currently offline  carlc
Messages: 143
Registered: July 2006
Location: Summerville, SC
Senior Member
Here's a place where you can get the metal glides for the bottom of the amps/cabinets. Not exact, but close to the originals.

https://www.amplifiedparts.com/products/P-H251
Re: Need 1 metal foot for 300 PA amp [message #21802 is a reply to message #21801] Mon, 03 November 2014 07:52 Go to previous messageGo to next message
fieldflower is currently offline  fieldflower
Messages: 71
Registered: July 2004
Location: Sweden
Member
carlc wrote on Mon, 03 November 2014 13:10
Here's a place where you can get the metal glides for the bottom of the amps/cabinets. Not exact, but close to the originals.

https://www.amplifiedparts.com/products/P-H251


Good tip! Thanks!

Cheapest shipping to Sweden is 3 x the cost of one foot...Laughing
But the total price is quite ok for having a complete amp again.
Might as well get 4 so not to have to swear about subtle height differences...

[Updated on: Mon, 03 November 2014 07:54]

Report message to a moderator

Re: Need 1 metal foot for 300 PA amp [message #21807 is a reply to message #21792] Tue, 04 November 2014 15:32 Go to previous messageGo to next message
carlc is currently offline  carlc
Messages: 143
Registered: July 2006
Location: Summerville, SC
Senior Member
They are sold as a set of 4
Re: Need 1 metal foot for 300 PA amp [message #21808 is a reply to message #21792] Tue, 04 November 2014 16:05 Go to previous messageGo to next message
fieldflower is currently offline  fieldflower
Messages: 71
Registered: July 2004
Location: Sweden
Member
I guess I should check the local hardware stores/websites before ordering.
There just might be perfectly good ones right around the corner...
Re: Need 1 metal foot for 300 PA amp [message #21810 is a reply to message #21792] Wed, 05 November 2014 07:39 Go to previous message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
Those Peavey feet are what I use also.
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Looking for Cabinets
Next Topic: Charcoal Blue or Red
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Oct 31 14:25:13 EDT 2024