VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Water damage (Discoloration of Cascade colored Naugahyde)

Show: Today's Messages :: Polls :: Message Navigator

Water damage [message #10667]

Mon, 30 March 2009 19:21

ampguy
Messages: 13
Registered: October 2008

Junior Member

Recently, my studio was demollished by a 300 year old oak tree. I actually had minimal damage due to the roof being supported by a eight foot length of steel truss that I was using as a decoration.

My Kustom 200B head and cabinet appeared a bit wet from the rain that was coming in through the hole in the roof. I wiped it off and later noticed that some water got between the head and the cab. On the high points of the naugahyde, where they touched the head, I noted discoloration. Most of the color and the sparkle effect is gone in those areas. Is there a treatment for this or will the color eventually return. I wasn't aware that water could discolor naugahyde.

Any advice from someone out there that has had a similar problem?

AMPGUY

Report message to a moderator

[Message index]

		Water damage By: ampguy on Mon, 30 March 2009 19:21
		Re: Water damage By: LesS on Tue, 31 March 2009 09:51
		Re: Water damage By: chicagobill on Tue, 31 March 2009 11:54
		Re: Water damage By: stevem on Tue, 31 March 2009 20:10
		Re: Water damage By: Jc on Tue, 31 March 2009 22:23
		Re: Water damage By: ampguy on Thu, 02 April 2009 08:33

Previous Topic:	K200B-4 Reverb Tank?
Next Topic:	Cosmetic Cat Damage (CCD)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Nov 12 04:29:39 EST 2024