Kustom Organ Effects Loop [message #27152] |
Sun, 06 January 2019 17:31 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
Sahara
Messages: 3 Registered: January 2019
|
Junior Member |
|
|
Hi. I have an early (#1048) Kombo organ in great shape and I would like to install an effects loop. Is this as easy as tapping into the blue and black wires coming off the keyboard?
|
|
|
Re: Kustom Organ Effects Loop [message #27154 is a reply to message #27152] |
Mon, 07 January 2019 12:07 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4768 Registered: June 2004 Location: NY
|
Senior Member |
|
|
If you go into this sites tech section and pull up the schematic for the combo or organ, then go to page 9 and on the lower right side above the info box you will see the output marked as " to power amp"
This is where you want to break the signal chain open which is this hot lead so to speak and install a jack on each end.
Your ground for each jack will be the chassis.
[Updated on: Mon, 07 January 2019 12:24] Report message to a moderator
|
|
|
|
|
|
Re: Kustom Organ Effects Loop [message #27159 is a reply to message #27152] |
Tue, 08 January 2019 09:48 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
rodak
Messages: 515 Registered: October 2001 Location: Georgia
|
Senior Member |
|
|
Thanks! I'll share this with my combo organ group, too. Seems pretty simple, but it's always nice to hear of someone successfully implementing such a thing.
www.combo-organ.com
|
|
|