VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » Feet (glides) for the head
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Feet (glides) for the head [message #10051] Wed, 03 December 2008 20:49 Go to next message
ampguy is currently offline  ampguy
Messages: 13
Registered: October 2008
Junior Member
Does anyone know where to obtain one (glide) metal feet for a K200? I recently obtained a head missing one foot.

AMPGUY

Report message to a moderator

Re: Feet (glides) for the head [message #10052 is a reply to message #10051] Wed, 03 December 2008 22:58 Go to previous messageGo to next message
ellum68 is currently offline  ellum68
Messages: 71
Registered: November 2007
Location: Sioux City, IA
Member
Antique Electronic (www.tubesandmore.com) sells a very close replacement set from Peavey. You'll have to change them all to get a match of course.

Report message to a moderator

Re: Feet (glides) for the head [message #10267 is a reply to message #10051] Mon, 12 January 2009 11:13 Go to previous messageGo to next message
gantamp is currently offline  gantamp
Messages: 4
Registered: January 2009
Location: Nashville
Junior Member
I ordered several from Peavey. I got 8 with screws for around $6 shipped, had to use a credit card. I called the 800# to order, didn't find them on the site anywhere. They appear very similar

Report message to a moderator

Re: Feet (glides) for the head [message #10268 is a reply to message #10051] Mon, 12 January 2009 12:35 Go to previous message
stevem is currently offline  stevem
Messages: 4754
Registered: June 2004
Location: NY
Senior Member
Yes, they are very close, in fact, I found this out some 3 years ago when I picked up a Peavey TNT150 for a practice amp ( to be left at a friends house who`s cat is a nut and would rip up any of my kustoms I would leave there)I have since taken off those feet and the feet from two other peavey amps my friend has.
Now they are in the reserve parts bin for all of the kustoms.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Ne w guy on the block
Next Topic: k200 b serial number plac
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon Jul 22 04:52:17 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software