VintageKustom.com: Comment Board » Use both channels on 250-4?

Home » VintageKustom.com » Comment Board » Use both channels on 250-4?

Show: Today's Messages :: Polls :: Message Navigator

Use both channels on 250-4? [message #6181]

Sat, 01 October 2005 16:06

fieldflower
Messages: 71
Registered: July 2004
Location: Sweden

Member

Hi all You experts out there!

I'm wondering if running my bass into both channels of my 250-4 can hurt it in any way, or make it run significantly hotter or something?

I have just tried it, to see if I could blend the channels to create a subtle fuzz without loosing any bottom.
It worked tremendously well - very nice sound.

I just used an adapter for headphones, a 1x6,3 - 2x6,3, plugged into channel 1, plugged in the bass to one of the adapters outputs and put a short cord from the other adapter output into channel 2.
I noticed a small decrease in volume when I plugged in also channel 2, but I think that's just because the bass's output gets divided between the 2 circuits, right..?

I really liked the sound I got, and also like the idea of using only the amp's own effects, but I'd rather buy a pedal than risk damage... The decrease in volume can easily be fixed by turning it up a little more... Cool

Can I do any harm by doing this, or is it safe for the amp?

/Peter

Report message to a moderator

[Message index]

		Use both channels on 250-4? By: fieldflower on Sat, 01 October 2005 16:06
		Re: Use both channels on 250-4? By: chicagobill on Mon, 03 October 2005 12:07
		Re: Use both channels on 250-4? By: fieldflower on Mon, 03 October 2005 17:37
		Re: Use both channels on 250-4? By: stevem on Thu, 06 October 2005 08:02
		Re: Use both channels on 250-4? By: fieldflower on Thu, 06 October 2005 09:34
		Re: Use both channels on 250-4? By: stevem on Fri, 07 October 2005 08:15

Previous Topic:	New K100 Owner questions
Next Topic:	manual 200 b1

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Sep 11 23:00:17 EDT 2024