VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » K200 B1 running at 4ohms (K200 B1)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K200 B1 running at 4ohms [message #27562] Wed, 23 October 2019 10:47 Go to next message
doc10039 is currently offline  doc10039
Messages: 7
Registered: March 2012
Location: Arizona
Junior Member
I didn't even think about it but is it ok to run this head at 4ohms? Finally got my JBL'S in and didn't cross my mind. Thanks

Report message to a moderator

Re: K200 B1 running at 4ohms [message #27563 is a reply to message #27562] Wed, 23 October 2019 13:15 Go to previous messageGo to next message
JDinPA17603 is currently offline  JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA
Member
You will be fine at 4 ohm total load. That is what the 200 series were designed for.

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

Report message to a moderator

Re: K200 B1 running at 4ohms [message #27565 is a reply to message #27562] Thu, 24 October 2019 06:12 Go to previous message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
X2 with the above.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: To keep my CTS speakers or swap out.
Next Topic: New Music Store in Dewey, OK full of Kustom's
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 09:02:19 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software