VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » Repair advise (k200 A-4 )
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Repair advise [message #19090 is a reply to message #19089] Sun, 11 August 2013 14:46 Go to previous messageGo to previous message
Jonomega3 is currently offline  Jonomega3
Messages: 81
Registered: November 2012
Member
It looks burnt in the pic but it just looks that way, there is some sort of dark goo that is partially on the resistor and dripping to the board. I tried to take a closeup pic but it was too out of focus. The fx channel is dead the straight one works but is kinda intermittent. I think the solder points on the board are touching the chassis cause there are only two tooth lock washers on it, I'll try it with alligator clips to see if the straight channel cleans up like mentioned before.

[Updated on: Sun, 11 August 2013 15:09]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 415B
Next Topic: Kustom logo for covers
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Aug 05 10:14:04 EDT 2024