VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Thermal Sensor K-150-6

Show: Today's Messages :: Polls :: Message Navigator

Thermal Sensor K-150-6 [message #11378]

Tue, 07 July 2009 20:31

navigio
Messages: 3
Registered: July 2009
Location: Prairie

Junior Member

Hello there: 1st post and hope it is getting out correctly.
Have a DOA Elmwood Sensor 2455 on this combo K-150-6 serial 81628. Shop tech has substituted a sensor from another application for brief test. It powers up previouly dead amp, plays fine. Can anyone give me the schematic values for this sensor (better yet, schematic!)or recommend a replacement part (maker & number) and source? It is round with two spade connectors; screws down with retainer ring. I'm not a tech so I apologize in advance if I've left out info you need. Flying blind, you see. Your assist is much appreciated. Thanks, in advance.

Report message to a moderator

Re: Thermal Sensor K-150-6 [message #11383 is a reply to message #11378]

Wed, 08 July 2009 05:48

stevem
Messages: 4754
Registered: June 2004
Location: NY

Senior Member

Its also called a thremal circuit breaker, Mouser sales carrys them and I think its rated to go open at 155 or so degrees.

Report message to a moderator

Re: Thermal Sensor K-150-6 [message #11384 is a reply to message #11378]

Wed, 08 July 2009 09:06

navigio
Messages: 3
Registered: July 2009
Location: Prairie

Junior Member

Thank you, stevem. I appreciate your information and effort. This site is a treasure.

Report message to a moderator

Re: Thermal Sensor K-150-6 [message #11407 is a reply to message #11378]

Fri, 10 July 2009 21:00

navigio
Messages: 3
Registered: July 2009
Location: Prairie

Junior Member

Hello stevem: I ordered from Mouser Electronics. Excellent service and tech advice. Fast delivery. Good people to trade with. Installed and she is now cook'n! Appears to be the potion needed. FYI out there: Stancor Disc Thermostat. Opens at 145-155F. Auto reset. Mfg P/N STO-150. Mouser P/N 802-STO-150. Works for us. Use your own expertise, of course. I'm not qualified to advise. Thank you again.

Report message to a moderator

Previous Topic:	250-4 original 4-switch footswitch markings?
Next Topic:	2x10 speaker cab...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 22 02:56:04 EDT 2024