Kustom K 300 pa [message #12773] |
Thu, 28 January 2010 09:42 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
Billyerock
Messages: 12 Registered: January 2010 Location: Englewood colorado
|
Junior Member |
|
|
[SIZE=2]I have 2 Kustom 302 pa Column cabinets none of the speakers are in it ... can anyone tell what they have or what to
|
|
|
|
Re: Kustom K 300 pa [message #12781 is a reply to message #12775] |
Sat, 30 January 2010 02:46 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
Billyerock
Messages: 12 Registered: January 2010 Location: Englewood colorado
|
Junior Member |
|
|
thanks for the info on the wiring ... are these 8inch speakers a certain frequency response for the midrange ??? I realize the 2 12 inch are for the low end frequency but I thought maybe the 8 inch had some special frequency rating for the midrange ...
[Updated on: Sat, 30 January 2010 02:47] Report message to a moderator
|
|
|
|
|
|
|
|
|
Re: Kustom K 300 pa [message #12913 is a reply to message #12873] |
Fri, 05 February 2010 19:08 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
pleat
Messages: 1454 Registered: June 2004 Location: Belding, Mi
|
Senior Member |
|
|
The main problem I see in using 10" speakers in place of the 8" speakers are the speaker bolts that would polk holes in the cones unless cut off flush. As easy as the baffle boards are to remove, I'd make two new baffle boards, save the originals and then do 4 matched speaker opening in the new baffle boards, add new grill cloth and re assemble.
pleat
|
|
|