| Kustom with a Fender '63 Reissue Reverb box [message #26217] |
Fri, 30 June 2017 09:32  |
vintagefan
Messages: 166
Registered: March 2014
Location: Dallas
|
Senior Member |
|
|
Thought I'd share this experience with you,,,,These Kustom's tones keep amazing me.
To preface, I only play Fender Telecasters into my left channel of my Kustoms.
My Kustom's reverb is excellent, but I wanted to experiment with a lot more reverb doing the early 60's surf sound.
I bought a Fender '63 Reissue Reverb box. It has tons of reverb with some slapback sound, long decay, and a bit of delay.
But what has really amazed me is when I plugged the Fender '63 Reissue Reverb box into my Kustom K100C-8 4x10's right channel(top input), and adjusted the Kustom and the Reverb box to sound just like my regular non surf sound on the left channel. I get a little bit of noticably compressed sound, more touch sensitive, much more blended evened out sound, more sustain, and a very clean sound.....It's like the Telecaster practically plays it's self.
I'm not a tech, But I'm thinking this little bit of compressed sound is due to the Fender '63 Reverb Reissue box's three tubes, and whatever is inside the Kustom interacting with the reverb box.
I have also found, that when plugging any pedal, eq box, reverb box, or guitar into my Kustoms, if I turn these devices down 10% or 20%, the Kustom's tones become cleaner and sweeter.
[Updated on: Fri, 30 June 2017 09:39] Report message to a moderator |
|
|
|
| Re: Kustom with a Fender '63 Reissue Reverb box [message #26219 is a reply to message #26217] |
Sun, 02 July 2017 06:07  |
stevem
Messages: 4774
Registered: June 2004
Location: NY
|
Senior Member |
|
|
The Fender Reverb unit uses a Cathode follower tube section for the clean output , this is a low impeadance output and the perfect thing to drive a high impeadance input like any guitar amp is.
This the technical discription of the comment in your last paragraph you posted!
|
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
]